Rocket Backups
Windows 10 & 11 Buy license · $69.95
How-to

How to Create a System Image in Windows 11: Built-in Tool and Scheduled Images

Create a full system image in Windows 11 with the legacy Backup and Restore tool or wbadmin, learn its limits, and set up images that run on a schedule.

Updated 5 minute read The Rocket Backups team

To create a system image in Windows 11, open Control Panel, go to System and Security → Backup and Restore (Windows 7), click Create a system image, choose an external drive and click Start backup. You can also run the wbadmin start backup command as an administrator. Both still work in Windows 11, but the tool is deprecated, so if you want images that run on a schedule, keep several versions and are easy to restore from, a dedicated backup program is the better long-term choice.

Here is what a system image is, how to make one both ways, how to restore it, and the limits you should know about.

What a system image is (and is not)

A system image is a block-level copy of the drives Windows needs to start: usually the C: drive plus the small EFI and recovery partitions. It contains Windows, your installed programs, drivers, settings and personal files exactly as they were at that moment.

Its strength is disaster recovery. If the drive fails or Windows is too damaged to repair, you restore the image to the same drive or a new one and your PC is back as it was, without reinstalling anything.

Its weakness is that it is a snapshot. Files you create after the image is taken are not in it, and with the built-in tool you restore the whole image, not single files. That is why most people pair a system image with a regular file backup. Our comparison of File History vs a system image explains how the two fit together.

What you need

  • A destination: an external USB drive is best. It must be formatted NTFS and have at least as much free space as the used space on C:. You can also use a second internal drive or a network share.
  • A way to boot for restore: a Windows USB recovery drive or a Windows installation USB. Make one now if you do not have one.
  • Time: the first image of a 200 GB drive to a USB 3 hard drive typically takes from 30 minutes to a couple of hours, depending on the drives.

Method 1: Backup and Restore (Windows 7)

  1. Connect your external drive.
  2. Press Start, type Control Panel and open it.
  3. Go to System and Security → Backup and Restore (Windows 7).
  4. In the left pane, click Create a system image.
  5. Choose On a hard disk and select the external drive. Windows warns you if the drive is not suitable.
  6. The drives Windows needs are ticked and cannot be removed. Tick any other drives you want included.
  7. Check the space estimate, then click Start backup.
  8. When it finishes, Windows offers to create a system repair disc. Skip it if you have no disc drive and make a recovery drive instead (Start → type Create a recovery drive).

The image is saved in a folder called WindowsImageBackup at the root of the drive. Do not rename or move it; System Image Recovery looks for it there.

Method 2: the wbadmin command

The same engine is available from the command line, which is handy for scripting.

  1. Right-click Start and choose Terminal (Admin).
  2. Run: wbadmin start backup -backupTarget:E: -include:C: -allCritical -quiet
  3. Replace E: with your backup drive's letter. -allCritical adds the partitions needed to boot, and -quiet skips the confirmation prompt.

You can put that line in Task Scheduler to make it run weekly. Our wbadmin start backup guide covers the full syntax and how versions are kept on different destinations.

Limits of the built-in tool

Microsoft has marked Backup and Restore (Windows 7) as deprecated. It still ships with Windows 11, but expect no fixes or new features. Practical limits today:

  • No encryption. Anyone with the drive can mount the image files and read everything.
  • Little control over versions. On a local drive, older images are kept as shadow copies and deleted when space runs low. On a network share, each image replaces the last.
  • All or nothing restore. System Image Recovery restores whole drives. To get a single file out you have to attach the VHDX file in Disk Management, which is awkward.
  • Schedules are basic and failures are easy to miss.
  • Restoring to a smaller drive usually fails, even if the data would fit.

Method 3: scheduled images with a backup program

If you want a system image that is always recent, set it up once in a backup program and let it run. Rocket Backups takes a complete system image of Windows, your programs and settings, including files that are open at the time, and then:

  • Runs on a schedule, such as nightly at 2 a.m., or when you plug in the backup drive.
  • Copies only changes after the first full image, so nightly images take minutes and use little space.
  • Keeps the versions you choose and removes old ones automatically.
  • Encrypts and compresses the image with AES-256 and a password.
  • Verifies each image after it is written.
  • Mounts any image as a drive letter, so you can copy a single file out without restoring everything.

For full recovery, you make a bootable rescue USB from inside Rocket Backups and use it to restore the last image to the same drive or a brand-new one.

How to restore a system image

With the built-in tool, restoring works like this:

  1. Connect the drive that holds the image.
  2. If Windows starts, go to Settings → System → Recovery and click Restart now next to Advanced startup. If it does not, boot from your recovery drive.
  3. Choose Troubleshoot → Advanced options → See more recovery options → System Image Recovery.
  4. Select the latest image (or an older one), follow the prompts and confirm. The target drive is overwritten.

If you are restoring onto a replacement drive, see our guide to restoring a system image to a new hard drive or SSD.

Restoring an image puts the drive back exactly as it was when the image was taken. Anything saved since then is lost unless it is in a newer file backup, so copy recent files off first if you can.

How often to make a system image

Monthly is a sensible minimum for a home PC, plus an extra one before big changes such as a Windows feature update or a new driver. If you use incremental images, nightly is realistic because each run is small. Keep at least two or three images so a problem that crept in before the latest one does not leave you stuck.

Frequently asked questions

Is the system image tool still in Windows 11?

Yes. Backup and Restore (Windows 7) is still in Control Panel and can create a system image, but Microsoft lists it as deprecated, so it gets no new features.

How big is a Windows 11 system image?

Roughly the size of the used space on the drives included, usually the C: drive plus the small system partitions. Compression in third-party tools can make it noticeably smaller.

Can I restore a system image to a different drive?

Yes, as long as the new drive is at least as large as the space the image needs. You boot from recovery media and choose the new drive as the target.

Get three guides like this every month, plus software update notices.Subscribe →